how to install nvidia drivers on ubuntu 16.10

#How to install nvidia drivers on ubuntu 16.10 how to#
#How to install nvidia drivers on ubuntu 16.10 driver#

To fix the splash screen create and edit $ sudo nano /etc/initramfs-tools/conf.d/splashĪnd fill it with the following line echo FRAMEBUFFER=y Make sure to select a resolution that matches the aspect ratio of the native resolution of your monitor. If you find a resolution higher than 1024x768 in the list, then you can use it as the value of GRUB_GFXMODE to get better. It will display all the supported resolutions. At the grub console run the following command grub> vbeinfo The grub boot screen should have the resolution 1024x768.Īt the Grub boot screen press 'c' key to access the grub console. Now run the following command to regenerate the grub configuration file. # you can see them in real GRUB with the command `vbeinfo'Įdit it to look something like this GRUB_GFXMODE=1024x768 # note that you can use only modes which your graphic card supports via VBE # The resolution used on graphical terminal In the file look for the section that has a field named GRUB_GFXMODE declared. To fix the grub boot menu screen edit the file /etc/default/grub $ sudo nano /etc/default/grub The steps shown here can only change the resolution to a higher (supported) value, but may not provide the native resolution of your lcd monitor. Note that this has only been tested on Ubuntu 14.04 and many other users have reported issues with this method either not working or causing a blank screens at different places.

#How to install nvidia drivers on ubuntu 16.10 how to#

So this quick tutorial shows you how to fix the resolution at these screens. The splash screen being in low resolution is not likely to cause any problems, but the grub screen should have a better resolution when you need to work at the grub console for example. 640x480 being the most viable resolution, is used hence. The low resolution is caused because the Nvidia graphics drivers are not yet loaded at the point of grub screen and splash screen.Īt that point the system can display whatever resolution the graphics card supports via the VESA BIOS extensions. | 0 GeForce GT 710 On | 00000000:07:00.After installing and enabling the nvidia proprietory drivers you would notice that the grub screen and the Ubuntu splash screen (called Plymouth) at startup and shutdown are displaying in a low resolution graphics mode. | Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M.

| GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. You can check if everything was installed correctly by running the command nvidia-smi, which should return a similar-looking output: +-+

#How to install nvidia drivers on ubuntu 16.10 driver#

If X fails to find the NVIDIA X driver module, please install the `pkg-config` utility and the X.Org SDK/development package for your distribution and reinstall the driver. WARNING: nvidia-installer was forced to guess the X library path '/usr/lib' and X module path '/usr/lib/xorg/modules' these paths were not queryable from the system. Sudo chmod +x NVIDIA-Linux-x86_64-460.67.runįollow all the prompts the installer gives.ĭuring installation, you may get a warning similar to the one below. I ran the following commands: cd ~/Įxecute the command sudo apt-get install build-essential gcc-multilib dkms. sudo apt-get purge nvidia*įor me, I chose the 460.67 driver, which is the latest production branch version at the time of writing this. I tried to install the driver via apt previously, which failed, so I had to ensure any previous NVIDIA packages were removed.

Remove Any Previous Installations (*IMPORTANT*) As I initially stated in my question, attempting to install the driver on my Ubuntu 20.04 server OS didn't work (maybe it's a bug, I'm not sure), but I've detailed the exact steps I took below, which worked for me.Īfter getting the driver to work, I could just install CUDA the standard way.